Select language
Hydraulic Press Manufacturer · 40+ Years of Metal Forming Experience
C-frame (gap frame) hydraulic presses from 60 to 150 tons and closed-frame deep draw presses from 100 to 1,000 tons, for sheet metal forming and deep drawing. Standard models or engineered to order.
| Hydraulic press | Mechanical press | |
|---|---|---|
| Force source | Hydraulic fluid pressure (pump + cylinder) | Flywheel + crank or eccentric mechanical linkage |
| Force through the stroke | Full tonnage available at any point in the stroke | Peak force concentrated near bottom dead center |
| Tonnage & stroke | Programmable - adjust pressure, stroke length and speed per job on the same machine | Fixed by the machine's rated capacity and crank geometry |
| Cycle speed | Slower - governed by hydraulic flow rate | Faster - suited to high-volume repetitive strokes |
| Best suited for | Deep drawing, flexible or varied part runs, thicker or harder-to-form material | High-speed blanking and stamping of consistent parts, long production runs |
Neither type is strictly “better” - they're optimized for different production profiles. If your process is a fixed, high-volume stamping or blanking operation, a mechanical press generally gives faster cycle times at lower cost per part. If your process involves deep drawing, varies between jobs, or needs precise, programmable control over force and stroke, a hydraulic press is the more capable tool. Fresan manufactures both architectures, so this comparison is about picking the right machine for your process - see our mechanical press range alongside the hydraulic range above.
Hydraulic presses are particularly preferred when a three-dimensional component is to be manufactured from flat sheet metal in a controlled forming process, instead of welding or assembling it from multiple parts. Typical applications include:
sinks, pots, and pans drawn from stainless steel or aluminum blanks.
washing machine drums, panels, and enclosures.
body panels, fuel tanks, and structural brackets.
formed sheet-metal housings and transitions.
straightening, forming, and press-fit assembly work in job shops and OEM production lines.
The right press for each of these depends on part depth, material thickness and grade, and production volume - see the comparison above and the C-Frame and Deep Draw pages for the tonnage and bed-size ranges each line covers.
Every Fresan hydraulic press - C-frame and deep draw alike - ships with the safeguarding a US buyer expects on a production press: a dedicated safety controller, light curtains guarding the die area, anti-tie-down two-hand (palm button) control and an interlocked foot switch, and a pressure relief valve on the main circuit. Hydraulic safety valves are TÜV-certified with spool position monitoring. In the US, hydraulic presses fall under OSHA 29 CFR 1910.212 (general machine guarding), with ANSI B11.2 as the industry safety standard for hydraulic power presses; every press is also CE-certified by TÜV under the EU Machinery Directive. 460 V / 60 Hz / 3-phase electrics and control panels built to NFPA 79 / UL 508A are available on request for North American installations. Electrical, hydraulic and control components come from globally recognized suppliers, and every press runs on centralized lubrication.
Tell us your tonnage, configuration, and process requirements - we'll recommend the right hydraulic press for your application.
