130 Ton Gap Frame Stamping Press – FP 130P
The FP 130P fills the force gap between our 100-ton and 160-ton gap frame stamping presses in the back-geared range, rated at 1,300 kN (146 US tons). Its 0 - 5.20 in stroke range and 27.56 x 39.37 in bolster suit thicker sheet and higher-force forming work, at 50 strokes per minute in continuous operation. Like every model in this tonnage class, its 8-point gib-guided slide has a contact surface sized close to the bolster itself, distributing force evenly even under heavy load and allowing larger progressive dies. Like every Fresan press, it's backed by over 40 years of press manufacturing experience and built for years of continuous production use.
Technical Specifications
Complete technical specifications for the FP 130P. All values in inches unless noted - use the toggle for metric.
| Model | FP 130P |
|---|---|
| Nominal Force (kN) | 1300 |
| Capacity | 130 t146 US tons |
| Rated Output Distance (mm) (from BDC) †Rated Output Distance (in) (from BDC) † | 4.50.18 |
| Stroke, Adjustable (mm)Stroke, Adjustable (in) | 0 - 1320 - 5.2 |
| Slide Adjustment (mm)Slide Adjustment (in) | 903.54 |
| Strokes per Minute (SPM) | 50 |
| Shut Height over Bolster (mm) ††Shut Height over Bolster (in) †† | 36814.49 |
| Shut Height over Bed (mm) ††Shut Height over Bed (in) †† | 45818.03 |
| Bolster Area (L-R × F-B) (mm)Bolster Area (L-R × F-B) (in) | 700 x 100027.56 x 39.37 |
| Bolster Thickness (mm)Bolster Thickness (in) | 903.54 |
| Bolster Bore (⌀ mm)Bolster Bore (⌀ in) | 1003.94 |
| Slide Area (L-R × F-B) (mm)Slide Area (L-R × F-B) (in) | 540 x 65021.26 x 25.59 |
| Shank Hole (⌀ mm)Shank Hole (⌀ in) | 602.36 |
| Throat Depth (mm) †††Throat Depth (in) ††† | 35013.78 |
| Air Pressure (Bar)Air Pressure (psi) | 4-658-87 |
| Weight (kg)Weight (lb) | 950020940 |
† Rated output distance from the bottom dead center (BDC) at which the nominal force is reached.
†† Shut height measured with stroke down and slide adjustment up. (SDAU)
††† Distance from the centerline of the slide to the frame.
Standard Equipment
Safety Features
- •Conformity to CE safety regulations
- •Safety controller
- •Double body press safety valve
- •Light curtains guarding the point of operation
- •Covers with safety switches
- •Hydraulic overload protector (HOLP)
Construction & Drive Mechanics
- •Welded steel frame, engineered for high rigidity
- •Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC ground for min. surface friction
- •SnBz-12 quality bronze bushings
- •Fully closed gearbox with silent helical gears running in oil bath
- •Pneumatic clutch-brake combination
- •Pneumatic counterbalance cylinders
- •Slide guided on 8-point gibs
Control & Operation
- •AC inverter (standard on all models)
- •Automatic central lubrication (PLC-controlled)
- •Used oil collectors
- •HMI/touchscreen operator panel
- •2-hand & foot pedal control
- •Automatic cyclic mode with light curtains
- •Vibration pads/shock absorbers
- •Motorized slide adjustment
Optional Equipment
Available extras and automation options
- •Additional bolster
- •Upper and lower knockouts (part ejectors)
- •Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders)
- •Special design