60 Ton Gap Frame Stamping Press – FP 60P
The FP 60P is the entry point to our back-geared range of gap frame stamping presses, rated at 600 kN (67 US tons). Higher tonnage is achieved through the gear-reduction drive, while the slide keeps the same 4-point V-gib guiding used across our flywheel models. Running at 65 strokes per minute in continuous operation, with a 0 - 3.94 in stroke range, it's well matched to demanding mid-tonnage work. Its 19.69 x 27.56 in bolster suits larger dies than the flywheel range below it. Like every Fresan press, it's backed by over 40 years of press manufacturing experience and built for years of continuous production use.
Technical Specifications
Complete technical specifications for the FP 60P. All values in inches unless noted - use the toggle for metric.
| Model | FP 60P |
|---|---|
| Nominal Force (kN) | 600 |
| Capacity | 60 t67 US tons |
| Rated Output Distance (mm) (from BDC) †Rated Output Distance (in) (from BDC) † | 3.50.14 |
| Stroke, Adjustable (mm)Stroke, Adjustable (in) | 0 - 1000 - 3.94 |
| Slide Adjustment (mm)Slide Adjustment (in) | 702.76 |
| Strokes per Minute (SPM) | 65 |
| Shut Height over Bolster (mm) ††Shut Height over Bolster (in) †† | 26510.43 |
| Shut Height over Bed (mm) ††Shut Height over Bed (in) †† | 34013.39 |
| Bolster Area (L-R × F-B) (mm)Bolster Area (L-R × F-B) (in) | 500 x 70019.69 x 27.56 |
| Bolster Thickness (mm)Bolster Thickness (in) | 752.95 |
| Bolster Bore (⌀ mm)Bolster Bore (⌀ in) | 853.35 |
| Slide Area (L-R × F-B) (mm)Slide Area (L-R × F-B) (in) | 450 x 29517.72 x 11.61 |
| Shank Hole (⌀ mm)Shank Hole (⌀ in) | 451.77 |
| Throat Depth (mm) †††Throat Depth (in) ††† | 2509.84 |
| Air Pressure (Bar)Air Pressure (psi) | 4-658-87 |
| Weight (kg)Weight (lb) | 30006610 |
† Rated output distance from the bottom dead center (BDC) at which the nominal force is reached.
†† Shut height measured with stroke down and slide adjustment up. (SDAU)
††† Distance from the centerline of the slide to the frame.
Standard Equipment
Safety Features
- •Conformity to CE safety regulations
- •Safety controller
- •Double body press safety valve
- •Light curtains guarding the point of operation
- •Covers with safety switches
- •Mechanical fuse for overload protection
Construction & Drive Mechanics
- •Welded steel frame, engineered for high rigidity
- •Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC ground for min. surface friction
- •SnBz-12 quality bronze bushings
- •Fully closed gearbox with silent helical gears running in oil bath
- •Pneumatic clutch-brake combination
- •Pneumatic counterbalance cylinders
- •Slide guided on 4-point V-gibs
Control & Operation
- •AC inverter (standard on all models)
- •Automatic central lubrication (PLC-controlled)
- •Used oil collectors
- •HMI/touchscreen operator panel
- •2-hand & foot pedal control
- •Automatic cyclic mode with light curtains
- •Vibration pads/shock absorbers
Optional Equipment
Available extras and automation options
- •Additional bolster
- •Upper and lower knockouts (part ejectors)
- •Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders)
- •Special design